How to sew a DIY embroidered fabric mask by 'Joooyco'

1. Cut out 2 pieces of the embroidered mask.

2. Repeat the same with 2 pieces of lining fabric.

3. Grab the 2 pieces of the outer fabric, and pin them up, right sides together.

4. Sew along the pinned edge of both the outer and lining fabric pieces. 

5. Open the pieces and press the seam open by using an iron. 

6. Line up the outer and inner layers, pin the right sides together at the center seams. Sew the top and bottom of the mask along the sewing line in the pattern, leaving the sides for turning.

7. Flip inside out and press the seams. Use a pointed stick to push the edges neatly and trim the side edges.

8. Fold the edge of the fabric on the side to hide it inside. Prepare an elastic mask bands, tied in a loop.

9. Insert the elastic bands into the edge with the knot side hidden inside. Use pins or clips to pin it precisely between the mask strap and the edge. Feel free to adjust the length of the elastic to fit properly.

10. Sew both sides to finish.

11. Done! You can watch the full tutorial video in detail on #joooycoyoutubechannel : ) Thank you!